Domestic Appliances Vibration Isolation

Explore Solutions

Reduce Household Vibration, Noise and Unwanted Movement at the Source

Domestic appliance vibration isolation reduces movement and structure-borne noise from household equipment at the source. Washing machines, pumps, treadmills and workshop tools can transfer vibration into floors and surrounding construction. This can cause excessive noise, appliance movement, reduced performance and premature wear.


DECIBEL vibration isolation solutions use anti-vibration pads, elastomeric mounts and spring isolators to control vibration before it spreads. They help improve equipment stability, reduce noise transfer and extend appliance service life.
Stacked, multi-colored rubber mats with circular cutouts.
A square, black, rubber material with red layers and round holes.
Close-up of a black metal frame with a tow hitch and ventilation holes, resting on a weathered concrete surface outdoors.
Close-up of an industrial machine base with yellow and black safety stripes.
A floor with black risers for leveling.
A room with concrete floors and square pads arranged in rows.
A gray Cybex treadmill sits on a light-colored floor.
Gray Bluebox brand air conditioner.
Close-up of pipes and a building exterior.
Exterior of a metal industrial air conditioning unit on a steel support frame.
A gray commercial air conditioning unit sits on a tiled surface.
Vibro-EP

A versatile anti-vibration pad designed to reduce vibration and noise from domestic appliances and lightweight equipment. Ideal for washing machines, dryers, fitness equipment and small mechanical systems.

€9,02
View product
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS
Vibro-EPMS

A reinforced anti-vibration pad with an anti-slip surface for appliances and equipment exposed to higher dynamic forces. Provides improved stability while reducing vibration transmission.

€51,58
View product
Two black interlocking tiles.
Close-up of an air conditioner's base, showing a black rubber foot with a bolt and washer.
Gray interlocking floor tiles with a white tool.
Black rubber floor tile.
Gray interconnected blocks with circular designs and holes.
Black dual fastener with screw, anchor, and bolt.
Mechanical testing machine applying pressure to a black rubber component.
Vibro-TiLe

A durable vibration isolation tile developed for heavier domestic appliances and lightweight machinery. Helps minimise structure-borne vibration while protecting supporting floors.

€45,90
View product
Vibro-Profi
Vibro-Profi

A high-capacity vibration isolation material for larger domestic equipment and light commercial applications. Designed to provide reliable vibration control under higher loads.

€9,02
View product
Vibro-MPF
Vibro-MPF
Vibro-MPF

A multi-purpose elastomeric mount suitable for pumps, fans, ventilation systems and light machinery. Reduces vibration transmission and helps protect surrounding structures.

€23,21
View product
Black rubber bumper stop.
Close-up of HVAC unit with vibration dampeners.
Metal HVAC duct suspended from ceiling with vibration isolation mounts.
Gray suspended commercial air conditioner with metal rods and nuts.
Industrial ventilation system with metal ductwork.
Close-up of a white Samsung air conditioner unit with a circular fan grill, mounted on shock absorber feet.
Vibro-R

A compact elastomeric mount engineered to isolate vibration from pumps, ventilation units, compressors and other lightweight mechanical equipment. Delivers effective vibration reduction in a small footprint.

€4,78
View product
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2
Vibro-EM.2

A resilient anti-vibration mount designed for suspended or floor-mounted domestic mechanical systems. Reduces vibration transfer while improving equipment stability and durability.

€36,26
View product
Vibro-EPM
Vibro-EPM
Vibro-EPM
Vibro-EPM
Vibro-EPM
Vibro-EPM
Vibro-EPM
Vibro-EPM
Vibro-EPM
Vibro-EPM

A steel-reinforced isolation pad developed for applications requiring improved load distribution and long-term support. Ideal for heavier domestic appliances and utility equipment.

€18,96
View product
A gray shock-absorption spring mount.
Several large air conditioning units resting on vibration isolation mounts on a tiled surface.
An air conditioning unit sits on vibration isolators.
Close-up of air conditioning units on a metal frame, each supported by a black rubber mount with a visible bolt.
Multiple large, blue air conditioning units sitting on concrete blocks on a roof.
Vibro-AMR

A restrained spring isolator providing low-frequency vibration isolation with additional lateral stability. Recommended for lightweight equipment subject to movement or dynamic operating conditions.

€74,27
View product
Vibro-Brick
Vibro-Brick
Vibro-Brick
Vibro-Brick
Vibro-Brick
Vibro-Brick
Vibro-Brick

A robust vibration isolation mount designed for heavier household equipment and mechanical installations. Provides dependable vibration damping while supporting increased loads.

€19,81
View product
Metal vibration isolator with bolt and rubber.
<tc>Vibro-3D</tc>
Wall-mounted black speaker with silver bracket.
Wall-mounted black loudspeaker.
Industrial pump and motor on vibration isolators.
Black pipe with a gray valve connected to a wall with a silver bracket.
Ceiling-mounted metal ductwork with support rods and various utility pipes.
Black industrial pump and motor mounted on vibration isolators.
Vibro-3D

A multi-directional vibration isolator that reduces vibration transfer in all three axes. Suitable for domestic mechanical equipment where vibration occurs from multiple directions.

€64,91
View product
A blue spring, sandwiched between a black platform and a silver disk.
Close-up on rooftop HVAC unit supports with spring isolators.
Several large, white industrial air conditioning units sitting on concrete blocks on a flat roof.
Industrial air conditioning unit.
Air conditioning unit with spring mounts on a concrete floor.
Exterior rooftop mechanical equipment with spring vibration isolators.
Silver coil spring with threaded bolt, washers, and black rubber base.
VIBRO-AM Spring mount dimensions
Vibro-AM

A compact spring isolator developed for lightweight equipment requiring superior low-frequency vibration isolation. Ideal for pumps, small compressors and sensitive mechanical systems.

€45,90
View product

Which Vibration Isolation Product Is Right for Your Application?

Domestic appliances and lightweight machinery generate different levels of vibration depending on their weight, operating speed and installation conditions. The guide below helps you quickly identify the most suitable DECIBEL vibration isolation product based on your application. That makes it easier to choose he right solution for effective vibration and noise reduction.

If Your Project Involves:

Choose:

Everyday vibration isolation for washing machines, dryers and household appliances

Vibro-EP

Improved stability with anti-slip protection for vibrating appliances

Vibro-EPMS

Heavy-duty floor isolation for heavier appliances and light equipment

Vibro-Tile

High-capacity vibration isolation for larger domestic equipment

Vibro-Profi

A versatile anti-vibration mount for pumps, ventilation units and light machinery

Vibro-R

A compact elastomeric mount for suspended or floor-mounted equipment

Vibro-EM.2

Greater load distribution and support for heavier domestic installations

Vibro-EPM

A multi-purpose mount for pumps, fans and mechanical systems

Vibro-MPF

Robust vibration isolation for heavier utility equipment

Vibro-Brick

Multi-directional vibration and shock isolation

Vibro-3D

Low-frequency vibration isolation for lightweight machinery

Vibro-AM

Restrained spring isolation where additional stability is required

Vibro-AMR

Common Applications

Laundry Appliances

Washing machines and tumble dryers are among the most common sources of household vibration and structure-borne noise. During high-speed spin cycles, vibration can transfer directly into floors and surrounding structures, causing excessive noise, appliance movement and discomfort.

DECIBEL's anti-vibration pads and mounts help stabilise appliances, reduce vibration transmission and improve overall operating performance. They are suitable for both new installations and existing homes.
 

Typical applications:

  • Washing machines
  • Washer-dryers
  • Tumble dryers
  • Laundry cabinets
  • Utility room appliances
  • Washing machine pedestals
  • Stacked washer-dryer units
  • Apartment laundry rooms
  • Residential utility spaces
  • Shared laundry facilities

Home Mechanical Systems

Many domestic mechanical systems generate continuous vibration that can be transmitted into floors, walls and pipework. Proper vibration isolation reduces structure-borne noise, protects supporting surfaces and improves long-term equipment reliability.
 

Easy to install and suitable for a wide range of lightweight equipment, these solutions are ideal for both residential and light commercial mechanical installations.
 

Typical applications:

  • Pool pumps
  • Circulation pumps
  • Water booster pumps
  • Domestic ventilation units
  • MVHR systems
  • Air conditioning condensers
  • Small air compressors
  • Water filtration systems
  • Domestic generators
  • Utility plant equipment

Home Workshops and Hobby Equipment

Lightweight machinery used in garages, workshops and hobby spaces can generate significant vibration despite their compact size. Vibration isolation helps improve stability, reduce noise and prevent unwanted vibration from transferring into floors and surrounding rooms.
 

These solutions are particularly useful where workshops are attached to homes or located above occupied spaces.
 

Typical applications:

  • Bench grinders
  • Drill presses
  • Mitre saws
  • Table saws
  • Small air compressors
  • Hobby CNC machines
  • 3D printers
  • Woodworking equipment
  • DIY workshop machinery
  • Workbenches and equipment stands

Fitness and Vibration-Sensitive Equipment

Exercise equipment and vibration-sensitive devices can transmit vibration into floors, affecting nearby rooms and reducing user comfort. Isolation products help minimise vibration transfer while improving equipment stability and protecting finished floor surfaces.
 

Suitable for residential properties, apartments and light commercial environments, these solutions provide an effective way to reduce everyday vibration without permanent structural modifications.
 

Typical applications:

  • Treadmills
  • Exercise bikes
  • Rowing machines
  • Home gyms
  • Massage chairs
  • Hi-Fi cabinets
  • Home server racks
  • Laboratory instruments
  • Sensitive electronic equipment
  • Precision desktop machinery

Key Performance Criteria for Domestic Appliance and Lightweight Equipment Isolation

Domestic appliance vibration isolation depends on equipment weight, movement pattern and floor surface. The criteria below explain how load capacity, damping behaviour and stability affect real performance. They help match the isolation product to washing machines, pumps, treadmills, workshop tools and other lightweight equipment.

Load Capacity

Load capacity is the working weight each isolation point can support while still compressing as intended.


For domestic appliance vibration isolation, light-duty pads may support small point loads of around 8 to 20 kg. Some pad formats suit higher loads when the equipment weight is spread across a larger base.


If the load is too low, the pad can stay too stiff. If the load is too high, the material can flatten and lose damping performance.


Start with the actual appliance weight and the number of contact points. Include any pedestal or frame where it carries the load. This keeps the isolator within its working range and helps reduce movement over time.

Isolation Material

Isolation material defines how the product reacts under the weight and repeated movement.


Rubber and elastomeric materials provide damping for everyday vibration from domestic appliances and lightweight equipment. They help absorb movement without adding complex installation details. Spring-based isolation is used where greater movement control is needed. 


The right material should match the load, vibration level and floor surface, while keeping its shape over long-term use.

Vibration Frequency

Vibration frequency describes how fast an appliance or lightweight machine vibrates during operation:

  • Washing machine spin cycles often sit around 10 to 23 Hz, based on 600 to 1,400 revolutions per minute. 
  • Small pumps and fan motors often create vibration around 25 to 50 Hz. 
  • Rotating workshop tools can produce higher-frequency vibration, especially when motor speed rises above 3,000 revolutions per minute.

Anti-vibration mounts and pads work well for many domestic appliances because they provide damping and stable support. Spring isolators are used where lower-frequency vibration needs more movement from the isolator.

 

The isolator should match the equipment speed and vibration pattern. This helps reduce transmitted noise without making the appliance unstable.

Damping Performance

Damping performance describes how well the isolation material absorbs vibration energy during appliance operation.


For domestic appliances, this matters during spin cycles, pump starts and machine shutdown. Good damping helps soften short bursts of movement before they reach the floor or surrounding construction.


It also helps reduce resonance that can make lightweight equipment sound louder than expected. The isolator should provide enough damping without allowing the appliance to rock or creep during use.

Equipment Stability

Equipment stability means the isolator must reduce vibration without letting the appliance move out of position.


Pads and mounts should keep the load evenly supported during repeated dynamic forces. This is important during washing machine spin cycles, treadmill use and pump start-up.


The product should also suit the floor surface. If the isolator is too soft or poorly loaded, the equipment can rock, creep or lose alignment during operation.

Installation Surface

DECIBEL’s domestic vibration isolation range includes pad-based solutions for hard floors and compact supports for defined contact points.


Concrete floors usually provide a stable base for vibration damping. Timber and suspended floors can move more easily, so the isolator must reduce transfer without allowing the appliance to creep. Tiled surfaces need support that protects the finish from marking or concentrated pressure.


The product should suit both the equipment weight and the floor surface. This helps reduce vibration while keeping the appliance stable during repeated operation.

Environmental Resistance

Some domestic and light commercial equipment operates in demanding environments where moisture, temperature changes or occasional chemical exposure may affect long-term performance.

 

DECIBEL’s domestic vibration isolation range includes materials suited to indoor utility areas and more exposed light-duty installations. 

Outdoor pumps, ventilation systems, garage workshops and utility rooms all benefit from vibration isolation materials designed to resist ageing, deformation and environmental deterioration over many years of continuous use.

Long-Term Reliability

Long-term reliability depends on how well the isolation material keeps its shape under repeated appliance movement.


High-quality pads and mounts should resist permanent compression, cracking and loss of elasticity. This helps maintain stable vibration reduction over years of everyday use.


DECIBEL’s domestic vibration isolation range is designed for consistent support under regular operating loads. The right product helps protect the appliance, reduce maintenance pressure and preserve floor-level vibration control.

Not sure which vibration isolation product is right for your application? Our specialists can help you choose the most suitable solution based on your equipment, load, operating conditions and installation requirements.

Contact Us

Who Are These Products For?

Homeowners and Apartment Residents

Daily appliance vibration becomes a problem when it travels through floors and reaches nearby rooms. This often appears as low-level humming, appliance movement or impact-like noise during operation.


DECIBEL vibration isolation products help reduce structure-borne noise without major building work. They also improve appliance stability and protect finished floor surfaces from repeated movement.

Installers, Plumbers and HVAC Contractors

Domestic mechanical installations need vibration control that works from the first day of use. Heating, ventilation and air conditioning contractors also need products that are easy to specify around load and support conditions.


Our appliance isolation solutions help reduce vibration transfer from compact mechanical equipment. This supports quieter installations and lowers the risk of return visits caused by avoidable noise complaints.

Home Workshops and Small Businesses

Light machinery needs stable support when vibration affects accuracy or is transferred to workbenches. This matters in compact workshops where equipment runs close to occupied rooms.


DECIBEL vibration isolators help reduce vibration transmission from small machines and bench-mounted equipment. They support steadier operation while limiting noise transfer into floors or surrounding construction.

Fitness, Audio and Sensitive Equipment Users

For home gyms, audio enthusiasts, laboratories and users of vibration-sensitive equipment, controlling vibration improves both performance and user experience.

DECIBEL isolation products help reduce movement at the contact points. This supports quieter use, better stability and lower vibration transfer through the floor. 

Why Choose DECIBEL for Vibration Control?

Expert Engineering Support

Our specialists help you select the most suitable pads, mounts or spring isolators based on equipment weight, operating conditions and installation environment. This ensures reliable long-term performance, and no money is spent on the wrong solutions.

Comprehensive Product Range

DECIBEL offers one of Europe's most comprehensive ranges of vibration isolation products for domestic appliances and lightweight equipment. From washing machines to fitness equipment, we provide solutions for virtually every residential vibration challenge.

Fast Delivery

Many of our vibration isolation products are available from stock, allowing fast and reliable delivery throughout Europe and beyond. Whether you're replacing existing isolators or completing a new installation, you receive the products without delays.

Proven Industrial Performance

With more than 5,000 completed soundproofing and vibration control projects across over 40 countries, DECIBEL combines practical engineering expertise with high-performance products. Our solutions are trusted by homeowners, installers and professionals worldwide.

What Do Our Customers Think?

Relevant Standards, Codes and Compliance Requirements

Domestic vibration isolation products are rarely certified against one standalone standard. They are usually specified as part of a wider performance strategy where appliance vibration affects noise transfer or equipment stability.


The references below show the main standards, codes and guidance that may influence domestic appliance vibration isolation.

Domestic Mechanical Equipment and Appliances

Domestic appliance vibration isolation can support compliance where equipment noise or vibration transfers into floors, adjoining rooms, or neighbouring properties. It is usually specified as part of a wider acoustic and installation strategy.

 

Relevant frameworks can include:

  • Building Regulations 2010, Part E
  • Approved Document E, Resistance to the Passage of Sound
  • Environmental Protection Act 1990, Part III
  • Noise Act 1996
  • EN ISO 12354, Building Acoustics
  • BS 8233:2014, Guidance on Sound Insulation and Noise Reduction for Buildings
  • BS 6472-1, Human Exposure to Vibration in Buildings
  • Manufacturer installation instructions and warranty conditions

The isolation detail should match the appliance weight, contact points, and floor type. It should also reduce vibration paths that could cause nuisance complaints, failed acoustic expectations, or unstable operation after installation.

Heat Pumps, Air Conditioning and Residential HVAC

Modern heat pumps, air conditioning systems and domestic ventilation equipment often require vibration isolation to minimise structure-borne noise and help satisfy planning or acoustic requirements.

 

Relevant references may include:

  • EN 378 – Refrigeration Systems and Heat Pumps
  • EN 1886 – Air Handling Units
  • Eurovent recommendations
  • REHVA design guidance

Properly selected vibration isolators help reduce vibration transfer into buildings while maintaining equipment alignment and long-term reliability.

Building Acoustics and Residential Noise Control

Heat pump and residential air conditioning isolation can affect compliance when outdoor units transmit vibration into the building fabric. It also matters where tonal plant noise reaches neighbouring receptors.

 

Relevant frameworks can include:

  • MCS 020(a), Air Source Heat Pump Sound Calculation
  • EN 378, Refrigerating Systems and Heat Pumps
  • BS 4142:2014+A1:2019, Industrial and Commercial Sound Assessment
  • BS 8233:2014, Guidance on Sound Insulation and Noise Reduction for Buildings
  • Building Regulations 2010, Part E
  • Approved Document E, Resistance to the Passage of Sound
  • Environmental Protection Act 1990, Part III
  • Local planning requirements

The isolation detail should define the outdoor unit load, mounting arrangement and support surface. It should also account for operating speed, wind exposure and service connections. This helps the installed unit support planning noise assessments without creating rigid vibration paths through brackets or pipework.

Workshop Equipment and Light Machinery

Workshop equipment isolation can support compliance where vibration affects machine stability, user exposure, or noise transfer into nearby rooms. It is especially relevant when compact machinery operates on lightweight floors or shared building fabric.

 

Relevant frameworks can include:

  • Supply of Machinery (Safety) Regulations 2008
  • Machinery Regulation (EU) 2023/1230
  • Provision and Use of Work Equipment Regulations 1998
  • Control of Noise at Work Regulations 2005
  • Control of Vibration at Work Regulations 2005
  • EN ISO 12100, Safety of Machinery
  • EN 60204-1, Safety of Machinery, Electrical Equipment of Machines
  • Manufacturer installation recommendations

The isolation detail should match the equipment weight, operating speed and support surface. It should also maintain machine stability while reducing vibration transfer into floors, benches or surrounding construction.

UK-Specific Requirements

For projects in the United Kingdom, vibration isolation may contribute to compliance with:

  • BS 8233 – Guidance on Sound Insulation and Noise Reduction
  • Approved Document E – Resistance to the Passage of Sound
  • CIBSE Design Guidance
  • BSRIA Best Practice Guides

These references are commonly used when reducing structure-borne vibration from domestic mechanical equipment and residential building services.

North American Requirements

For projects in the United States and Canada, vibration isolation is commonly considered as part of residential mechanical design, HVAC installations and equipment support.

 

Relevant references include:

  • ASHRAE HVAC Noise and Vibration Guidelines
  • International Building Code (IBC)
  • ANSI-accredited engineering standards
  • Local building and mechanical codes
  • Manufacturer installation specifications

Selecting vibration isolators that match the equipment load, operating conditions and installation surface helps ensure dependable performance throughout the life of the equipment.

If your project specification references a particular European, UK, North American, or industry-specific standard, our engineers can help identify the most appropriate vibration isolation solution and recommend products that align with your technical and compliance requirements.

Frequently Asked Questions

Can vibration isolation protect my appliance from premature wear?

Yes. Reducing excessive vibration helps minimise stress on motors, bearings, fasteners and supporting components. This can improve equipment reliability and reduce maintenance over time, particularly for appliances that operate frequently or at high speeds.

Will anti-vibration products damage my floor?

No. Quality vibration isolation products are designed to distribute loads safely while protecting finished floor surfaces from concentrated pressure, scratches and long-term wear. They are suitable for most concrete, timber, tiled and laminate floors when correctly selected.

Are vibration isolation products suitable for outdoor installations?

Yes. Many vibration isolation products are designed to withstand outdoor conditions, including moisture, temperature fluctuations and UV exposure. They are commonly used beneath heat pumps, air conditioning condensers, pumps and other external mechanical equipment.

Do vibration isolators require maintenance?

Most elastomeric vibration isolators require little or no maintenance during their service life. Periodic inspection is recommended to check for signs of excessive wear, damage or overloading, particularly in demanding environments.

How do I know if vibration is causing the problem?

Typical signs include appliances that move during operation, noticeable floor vibration, humming or buzzing felt through walls or floors, rattling furniture, or vibration that is felt more than it is heard. These symptoms often indicate that vibration is being transmitted into the building structure.

Can vibration isolation help if my neighbours complain about noise?

In many cases, yes. When noise is caused by vibration travelling through the building structure, vibration isolation can significantly reduce the amount of structure-borne sound reaching neighbouring rooms or apartments. The effectiveness depends on the source of the noise and the construction of the building.

Can I use the same vibration isolator for different appliances?

Sometimes, but not always. The correct product depends on the weight, operating characteristics and support points of each appliance. A solution that works well for a washing machine may not be suitable for a pool pump, treadmill or ventilation unit.

Can vibration isolation improve the performance of my equipment?

While vibration isolation does not increase an appliance's power or efficiency, it helps provide a more stable operating platform. Reduced vibration can improve running smoothness, minimise unwanted movement and contribute to more consistent performance.

Can vibration isolation be added to existing equipment?

Yes. Most vibration isolation products are designed for retrofit installations as well as new equipment. In many cases, they can be fitted without modifying the appliance or surrounding structure, making them a simple upgrade for reducing vibration and noise.

Why choose DECIBEL instead of generic anti-vibration pads?

DECIBEL offers engineered vibration isolation products developed for specific load ranges and applications rather than one-size-fits-all solutions. This makes it possible to match the isolator to the equipment, resulting in better vibration reduction, greater stability and more reliable long-term performance.

Contact Us For Personal Consultation

Get in touch by sending us a message, or book a free consultation to discuss your project with one of our experts.

We'll be happy to answer your questions and help you find the right solution.
Thanks for contacting us. We'll get back to you as soon as possible.

Name

Email
Phone

Message

support@decibel.shop

Services list